Siemens LOGO PLC Connecting with USB cable to Soft Comfort V6.0

USB Cable for Connection: 

With this cable, it allows communication between the PLC and LOGO Soft Comfort V6 software, this cable is a generic, and works with a wide range of this model PLC Logo. As you can see from the picture the cable has a USB connector at the other end an exclusive adapter port LOGO.

Image (1) 

USB Cable to connect to PLC LOGO!.

The PLC LOGO! Siemens: 

In the second picture we have the PLC, which can be powered by AC voltage from 115 to 240 volts, other versions can be supplied with other voltages including 24V DC.

Image (2)

The  PLC LOGO!.

Explaining the connection to PLC LOGO!: 

In the video below, initially shows the installation of the driver of the USB cable, adapter port on the PLC LOGO !, Once the driver installation is verified, it's created a virtual COM port in case the video was created COM4 this port must be configured in software SoftComfort if necessary if the program does not automatically recognized.